Boat Kits
HAKits are pleased to announce that we have recently developed and designed a series of small model boat kits that are available to purchase through our eBay store. Alternatively if you prefer to purchase direct, please call or email with your requirements.
To place an order please Email us directly here : enquiries@hakits.co.uk
I will send a Paypal request for payment
Universal Model Boat Stand
These unique and very practical stands can be used on most models with a V or flat bottom hull. The kit are self assemble, comes complete with bolts and nuts & foam strip. Assemble the 4 frames, glue to a board and adjust the support to the angle required to fit the boat hull. The base board is not included, this gives you the freedom to use a board of your own choice, size and material.
Medium for hulls up to about 5″ beam. £9.50
Large fro hulls 5 – 9″ beam £11.00
XL for boats over about 9″ beam £12.00
Postage from £3.50 to UK address’s
New 42' Narrow boat ( Naughty Lass )
The kit is a 1/12 scale 42″ long and 6.5″ beam. As with all my kits, it is built using various thicknesses of laser cut plywood and obechi. also includes 3d printed window frames, solar panel and various deck parts. ( figure & lifebelt not included ) A hardware pack including propshaft, rudder assembly and tiller arm is also available seperatly. The model photographed is styled & painted to represent the Naughty Lass (seen on TV)
Wood Kit £85.
Hardware kit £30
Flying Christine II
The boat was a channel island sea ambulance run by the St. Johns ambulance service. Its duty’s were to transfer patients from the islands to the hospitals. Easy build construction with laser cut ply parts and plastic window frames. Fittings and hardware are not included in the kit. The model is 32″ long and 8″ beam. It can be fitted with electric drive and R/C.
£69
ShoeString II
A semi scale sports power boat, available in 2 sizes. Traditional construction using laser cut ply parts and 3d printed window frames, air intakes, steering console and wheel. The prototype uses a speed 700 motor and a 3s lipo battery. Pilot and hardware are not included in the kit.
36" 1/12 scale £89
24" 1/18 scale £53
Rescue Launch
An 18″ Semi scale model of a Rescue / police launch. Easy build construction with laser cut ply parts and plastic window frames. Fittings and hardware are not included in the kit. It can be fitted with electric drive and R/C. Take a look at the Model in action.
£45
Narrow Boat
A 22” semi scale model of a typical narrowboat. The kit containing all the laser cut components to build this model plus 3D printed window frames and perspex glazing. Electric drive and R/C can be added
£45
Morston Crab boat.
Morston is a semi scale Norfolk crab fishing launch, Scaled at 1/16 scale (20″) long and at 1/12 scale (27″). For ease of construction the model kits uses laser cut Liteply and Birch ply parts and builds into a pretty model with good sailing characteristics. These kits are intended to be easy to construct but some experience would be an advantage. Scale detail and Radio control, electric motors can be fitted to convert the kit into a working model but the kits do not include any hardware, e.g. prop shaft, motor, battery, R.c. ect.
20" model £43
27" model £65
Ski Boat
Available in 2 sizes, 21” and 30″, The model kit containing laser cut liteply wood parts, Glazing and 3D printed frame, screws and step by step instructions. Suitable for electric drive and R/C. The Model in the Photo is the 21″ model and has been modified to take 2 small jet drive units. It would not normally have the center hatch.
21" model £39
30" model. out of stock
Offshore Racer
A semi-scale model based roughly on the Fairy Huntress 23. The model kit contains accurate laser cut liteply parts and builds in to a pretty 18” model.
£45
Aylsham Broads Launch
A stylish 1/24 semi-scale model of a 1950s Norfolk Broad style pleasure launch. The kit includes laser cut liteply parts and 3D printer window frames and glazing plus cockpit fittings.
The model is 20.5″ long and 7″ beam.
If you wish to add RC equipment and power, The model in the photos is using a speed 400 motor on a 2s lipo.
We have scaled up this lovely model to 1/16 scale making it 31″ long & 8″ beam.
20" kit £45
31" Kit £69
Blakeney
This Semi scale motor launch is now available in 2 sizes, 20″ 1/16 scale and 27″ 1/12 scale. The kit includes Laser cut liteply and birch ply parts and builds into this pretty model. These kits are intended to be easy to construct but some experience would be an advantage. Scale detail and Radio control, electric motors can be fitted to convert the kit into a working model but the kits do not include any hardware, e.g. prop shaft, motor, battery, R.c. ect.
20" model £45
27" model £65
Pilot Boat
Modelled on the Hartlepool pilot boat ‘Crofter’ This Kit is now available in 2 sizes. 1/24 semi-scale at 21″ & 1/16 scale at 32″. Both kits includes laser cut ply components, 3D printed liferaft and radar, Glazing and instruction manual. The 1/24 scale kit is designed for a single motor and prop shaft whilst the 1/16 scale model is designed to take twin motors and propshafts.
Watch the short video
21" kit £47
32" made to order.
Wroxham Broads cruiser
Wroxham, A semi scale model of a Norfolk Broads type cruiser from 1930’s. At 30 ” long and to a scale of about 1/16, the model has excellent sailing quality’s if you wish to add power and r.c. The Kit includes the usual high quality laser cut parts and instructions to construct the model plus 3D printed plastic components to finish this stylish boat. The kit does not include any hardware, e.g. rudder, propshaft, motor, rc gear ect. Hardware is available as separate items.
£65
Thames Slipper Launch
Based on a Thames Slipper Launch this 1/8 semi-scale kit builds in to a 35” model. The kit includes laser cut ply components, 3D printed plastic windscreen frames and glazing, 3d printed loom chairs, steering wheel and hatch frames, rear seating upholstery, and deck fittings also includes a step by step instruction manual. The flag, cushions and carpet are not included in the kit.
It can be fitted with electric drive and R.C.
https://youtu.be/9RGkKbMzbRo
Price £105
Running Gear
We now stock the running gear to suit HAKits model boats.
Mini & Small Rudder assemblys.
8-18″” slim M4 prop shaft
Universal joints with various inserts
Postage to UK addresses only
There will be a small postage charge of £3.50 to £5 on kits.
To order please E-Mail paul@hakits.co.uk
Payment can be made by Paypal to hphughes@hotmail.com